SIM key comparison in pneumatic gauge pressure for high accuracy pressure balances up to 120 kPa (SIM.M.P-K6)

Torres-Guzman J.C.; Aranzolo-Suarez J.; Flores-Martinez F.J.; Cruz L.D.L.; Olson D.A.; Forastieri J.; Solano A.; Neira C.; Couto P.R.G.; Palma J.; Garcia S. · Metrologia (2022) · DOI: 10.1088/0026-1394/59/1a/07011

Resumen

This report describes the results of a pneumatic pressure standards key comparison among eleven SIM National Metrology Institutes to determine their degree of equivalence in the pressure range from 10 kPa to 120 kPa in gauge mode. The pilot laboratory was the Centro Nacional de Metrología (CENAM, Mexico). All participating institutes used pneumatic pressure balances as their pressure standard. The transfer standard was a complete system including a pressure balance with a free-deformation piston-cylinder assembly and a set of masses. Eleven participants completed their measurements and reported the pressure-dependent effective areas of the transfer standard at specified pressures with the associated uncertainties. NRC/Canada and BSJ/Jamaica withdrew the comparison by not sending their measurements. To link the results of the nine laboratories that sent their results to the CCM.P-NIST, USA provided the reference values. To evaluate the compatibility of results of the participants their relative deviations from those obtained by NIST results were analyzed. The results of six participating NMIs agree with the NIST reference values within their expanded uncertainties (k = 2) in the entire pressure range from 10 kPa to 120 kPa according to the normalized error equation method.