Recycling Polyethylene Terephthalate for use in Structural Concrete with Natural River Aggregates

Huaquisto-Cáceres S.; Quenta-Flores D.; Flores-Quispe E.L. · Pollution (2023) · DOI: 10.22059/poll.2023.351113.1683

Resumen

Polyethylene terephthalate (PET) is one of the most common types of plastic waste found in municipal waste and has a negative impact on the environment, recycling and its use in concrete is an alternative solution to address these problems. The objective of the study was to evaluate the physical-mechanical behavior of hydraulic concrete with additions of PET plastic bottle fibers and natural river aggregates. The concrete was evaluated in its fresh state by means of the Slump and in its hardened state by means of density and compressive and flexural strengths, for which cylindrical and prismatic specimens were prepared with PET fibers at proportions of 2%, 4%, 6% and 8% by weight of cement plus the standard concrete designed for 21 MPa. It was found that the slump and density of the concrete decreased with additions of PET fibers. The 28-day compressive and flexural strengths increased to optimum values of 22.79 MPa and 3.19 MPa at 2% and 6% PET fibers, respectively. It is concluded that the viable application of 2 mm by 30 mm PET fibers in concrete is at 4% with dosages of 15.78 kg/m3 added to the standard concrete for structural elements subjected to compression and flexure with sustainable production at low cost.

Instituciones: Universidad Nacional del Altiplano; Universidad Nacional de Moquegua