Rapid and cost-effective fabrication of microfluidic chips with resin 3D printing

Latorre-Quevedo P.G.; Cárdenas-Infantes B.A.; Chancan-Aviles D.; Zimic-Sheen A.; Jamanca-Abalos K.A.; Cama M.; Kim S.; Sheen P.; Zimic M. · Progress in Additive Manufacturing (2026) · DOI: 10.1007/s40964-025-01391-z

Resumen

The fabrication of microfluidic chips has traditionally relied on photolithographic techniques. Although highly precise, these methods require specialized cleanroom facilities and involve multiple complex steps. In recent years, additive manufacturing—particularly resin-based 3D printing—has emerged as a promising alternative, offering more accessible, cost-effective, and rapid prototyping. In this study, we present a protocol for fabricating high-resolution microfluidic templates using an LCD-based resin 3D printer, followed by replication of microchannels in polydimethylsiloxane (PDMS). Our results show that while LCD 3D printing enables fast prototyping, it has limitations in accurately reproducing fine features (especially channel widths below 100 μm) due to overexpansion of cured resin. Morphological and dimensional analyses by scanning electron microscopy (SEM) revealed discrepancies between the designed and actual channel dimensions, primarily attributed to the printer’s pixel size constraints and light diffusion during polymerization. Despite these challenges, the ability to reuse a printed template for multiple PDMS replications significantly enhances fabrication scalability and cost efficiency. This study underscores the potential of resin-based 3D printing for microfluidic applications and provides optimization strategies to improve dimensional accuracy in future development. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2025.

Instituciones: Pontificia Universidad Católica del Perú