Quad-Active-Bridge Resonant-Type Single-Stage Three-Phase AC-DC Converter: Modulation and Control for V2G Applications

Sal Y Rosas D.; Chavez D.; Tafur J. · IEEE Transactions on Power Electronics (2025) · DOI: 10.1109/tpel.2025.3543691

Resumen

The single-stage (SS) ac-dc converter is a promising solution for bidirectional electric vehicle chargers (BEVCs) due to its smaller volume, higher efficiency, and durability compared with the two-stage ac-dc converter. Nevertheless, typically SS ac-dc structures implement highly complex modulation schemes because most of them use bipolar voltage switches. In this article, a novel modulation and control strategy is introduced for the SS quad-Active-bridge resonant-Type ac-dc converter, which only uses unipolar voltage switches. In the proposed modulation, grid voltages are modulated by duty ratio (DR), whereas the dc source voltage is modulated by phase-shift (PS) and DR. The PS angle takes a constant value according to grid currents amplitude. Moreover, the DR angles, used to modulate grid voltages, control the sinusoidal shape of grid currents according to proportional-integral-resonant controllers cascaded to a second-order low-pass filters and an active damping. Whereas, the DR angle, used to modulate the dc source voltage, is applied to reduce the high-frequency current, in case of reactive power transfer to the grid. Experimental results from a 1.5 kW prototype show high efficiency (96.4%), bidirectional active-reactive power transfer capability, and low harmonic distortion in the grid currents (1.1%), making it an ideal alternative for BEVCs.

Instituciones: Pontificia Universidad Católica del Perú