Obtaining Biodiesel from Soybean Vegetable Oil Using a Hydrodynamic Cavitation Reactor

Andia-Marron L.C.; Abad-Salcca J.; Medina-Collana J.T.; Villanueva-Martinez E.W.; López-Herrera J.A.; Guevara-Salcedo R.B.; Ordoñez-Santa Maria L.; Paz-Salazar R.; Taipe-Castro F.A.; Montaño-Pisfil J.A.; Vásquez-Llanos S.A. · Reactions (2026) · DOI: 10.3390/reactions7010018

Resumen

Hydrodynamic cavitation (HC) is an efficient technique for biodiesel production. The main contribution of this study is the development of a modular reactor with a universal stainless steel joint, whose design facilitates the installation, replacement, and maintenance of the orifice plate by eliminating flanges and bolts during assembly. Using this reactor, the study evaluated the synergistic interaction between feed pressure and methanol:oil molar ratio in the transesterification of soybean oil, employing a 32 factorial design. The orifice plate was 3 mm thick and had 19 holes with a diameter of 1.0 mm, installed downstream of the pump. The process was carried out for 45 min, using NaOH at 1 wt% relative to the oil and at 60 ± 5 °C. Feed pressures of 1.72, 2.41, and 3.10 bar and methanol:oil molar ratios of 6:1, 8:1, and 10:1 were evaluated, reaching a maximum yield of 92.98% at 3.10 bar and 8:1. Analysis of variance (ANOVA) confirmed a significant interaction (p < 0.0001) and allowed a second-order polynomial model to be fitted (R2 = 0.9981). In contrast, conventional mechanical agitation required 90 min to achieve 95% yield. The biodiesel produced met most American Society for Testing and Materials (ASTM) D6751 requirements, confirming the potential of HC as a viable alternative for intensifying biodiesel production.

Instituciones: Universidad Nacional Pedro Ruiz Gallo; Universidad Nacional del Callao