Multi-parameter simultaneous extraction with a novel microwave sensor based on coupled resonators

Juan C.G.; Potelon B.; Aquino A.; García-Martínez H.; Quendo C. · Scientific Reports (2024) · DOI: 10.1038/s41598-024-72061-3

Resumen

This work presents a microwave resonant multi-parameter sensor devoted to the simultaneous extraction of three characteristics of a homogeneous solid sample: its dielectric permittivity, its loss tangent and its thickness. The device is composed of three coupled resonators in two different substrate boards, having the sample between the boards, in a sandwich configuration. Presence of the sample impacts the electrical response of the device, not only influencing resonators, but also by affecting inter-resonator couplings. A method to analyse the response of the device, allowing for the extraction of the desired characteristics of the sample is proposed, as well as an experimental calibration procedure. The model is built upon 990 simulations, calibrated with three reference-samples measurements and then tested over 18 experimental measurements, with good results, thereby validating the multi-parameter sensing approach. © The Author(s) 2024.

Instituciones: Universidad Nacional de Ingeniería