Mix Design for Cellular Concrete Applied in Masonry Units Using Decyl Glucoside as a Foaming Agent for Construction in High Andean Cities in 2022

Oswaldo F.S.D.; Milagros H.V.F.; Simón M.T.V. · Communications in Computer and Information Science (2024) · DOI: 10.1007/978-981-99-6368-3_10

Resumen

The research aimed was to find a suitable mix design of cellular concrete applied in masonry units using decyl glucoside as a foaming agent for construction in high Andean cities, because of the advantages this offers, being the main one, thermal comfort since high Andean cities suffer from low temperatures, meeting the compressive resistance standard for masonry units and reducing the dead load, due to cellular concrete is not currently very commercial. Therefore, this study experiments with seven different proportions of water, cement, fine/coarse sand and a foaming agent to achieve better resistance. The study is of descriptive level in that the experimental method is employed in which we use an observation card; for the mixing process, an industrial cement mixer was used, which allows us to integrate the foaming water with the aggregates. The compressive resistance results were favorable obtaining results of up to 260.7 kg/cm2 and lightening the weight up to about 30% of standard concrete, in the other trials lower compressive resistance were achieved, but with a weight even lighter and also a lower volume. The conclusions determine that it is possible to realize a cellular concrete using decyl glucoside meeting the strength standard for masonry units by achieving reduced volume and weight. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2024.

Instituciones: Universidad Continental