Low-Latency FPGA-Based PLC Microprocessor for Industrial Automation in Compliance with IEC-61131-3

Cancino-Escobar M.; Delgado-Del-Carpio M.; Solís-Cisneros H.I.; Mota-Grajales R.; Hernández-Gutiérrez C.A. · Arabian Journal for Science and Engineering (2024) · DOI: 10.1007/s13369-024-08991-x

Resumen

This study presents the design and implementation of a PLC microprocessor adhering to the IEC-61131-3 standard, executed on a Cyclone V FPGA using a DE10-NANO development board. Our microprocessor optimizes the central processing unit by streamlining the data path, achieving a remarkable simulated response time of approximately 60 ns, equivalent to three clock cycles at a 50 MHz frequency for Boolean operations. To substantiate our approach, we conducted practical experiments utilizing a FESTO conveyor station, employing relays as actuators, and incorporating optical and inductive sensors. The results underscore the feasibility of our proposed approach and serve as practical validation of its efficacy. This work introduces a promising avenue for the development of cost-effective PLCs employing SoC FPGA variants. Additionally, a thorough comparison of execution times with other early reported architectures. Our microprocessor outperforms even well-established PLCs like the S7-312, with substantial reductions in execution times of 94.54% for floating-point operations, 71.42–93.33% for word operations, and up to 78.57% for bit operations. © King Fahd University of Petroleum & Minerals 2024.

Instituciones: Universidad Nacional de San Agustín de Arequipa