Saltar al contenido
República del Perú · Observatorio de la producción científica universitaria
OApol.org Observatorio de Inteligencia Científica Universitaria del Perú
OApol.org
Inicio Universidades Publicaciones Investigadores
Repositorios
Tesis y trabajos académicosRevistas
Indicadores
Ranking trimestralRanking por carreraObjetivos de Desarrollo SostenibleReporte OCDERed neuronal 3D
Acerca
MetodologíaPrivacidad

Generation of Electricity Through Papaya Waste at Different pH

Segundo R.-F.; Magaly D.L.C.-N.; Benites S.M.; Daniel D.-N.; Angelats-Silva L.; Díaz F.; Luis C.-C. · Environmental Research, Engineering and Management (2022) · DOI: 10.5755/j01.erem.78.4.31912

Resumen

A large amount of fruit waste is being a great environmental and social problem due to a lack of adequate stor-age. Among the most abundant waste is papaya, due to its high consumption in various varieties. These wastes can generate bioelectricity through organic waste, being an important parameter the pH. In this research, low-cost laboratory-scale microbial fuel cells were fabricated, using papaya waste as fuel at different pH (4, 5.73, 7, and 9) to obtain the optimum operating pH. It was possible to observe the maximum values of electric current and voltage of 17.97 mA and 1.02 V on days 16 and 14, in the cell with pH 7; while the cell with pH was the one that showed the lowest values. The electrical conductivity values increased from the first day, observing a maximum peak of 172.50 mS/cm for the cell with pH 7. However, the internal resistance values were low, the maximum value being for the cell with pH 4 (234.61 ± 34 Ω) and the minimum for the cell with pH 7 (46.543 ± 3.6 Ω). In the same way, the maximum power density was for the cell with pH 7 of approximately 645.74 ± 33.64 mW/cm2 and a current density of 5.42 A/cm2.

Instituciones: Universidad Privada Antenor Orrego; Universidad Autónoma del Perú; Universidad Privada Norbert Wiener; Universidad César Vallejo; Universidad Privada del Norte