Development of an Automated Testing System for Alternators with Real-Time Monitoring Based on IoT and Electrical Analysis

Salcedo J.G.; Obispo K.G.M.; Rojas J.J.H. · SSRG International Journal of Electrical and Electronics Engineering (2025) · DOI: 10.14445/23488379/ijeee-v12i6p102

Resumen

This research focuses on designing an automated test bench for alternators, which incorporates real-time monitoring using Internet of Things (IoT) technologies, advanced electrical analysis, and intelligent diagnostics based on a Multilayer Perceptron (MLP) artificial intelligence model. The system allows the testing of automotive alternators under various operating conditions, measuring the RPM, voltage, and current generated and sending the data to a web platform via an ESP32 microcontroller. Multiple tests were performed during the experiment at various load levels and speeds, demonstrating a direct relationship between voltage and RPM. Additionally, the PZEM-003/017 achieved a measurement margin of error of less than 1%, and the AI model’s fault detection accuracy exceeded 90%. Likewise, a finite element analysis (FEA) of the system’s structural framework was performed, validating the rigidity and safety of the structure under specified rigid loads through simulations of tension, displacement, and safety factors. The developed system provides accurate, cost-effective, and scalable diagnostic tools for alternators in industrial maintenance, technical training, and testing environments. The modular architecture, incorporation of dynamic speed control, and real-time predictive analytics capabilities represent a significant improvement over traditional methods. . This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Instituciones: Universidad Continental