Capacitance voltage curve simulations for different passivation parameters of dielectric layers on silicon

Sevillano-Bendezú M.A.; Dulanto J.A.; Conde L.A.; Grieseler R.; Guerra J.A.; Töfflinger J.A. · Journal of Physics: Conference Series (2020) · DOI: 10.1088/1742-6596/1433/1/012007

Resumen

Surface passivation is a widely used technique to reduce the recombination losses at the semiconductor surface. The passivating layer performance can be mainly characterized by two parameters: The fixed charge density (Q ox) and the interface trap density (D it) which can be extracted from Capacitance-Voltage measurements (CV). In this paper, simulations of High-Frequency Capacitance-Voltage (HF-CV) curves were developed using simulated passivation parameters in order to examine the reliability of measured results. The D it was modelled by two different sets of functions: First, the sum of Gaussian functions representing different dangling bond types and exponential tails for strained bonds. Second, a simpler U-shape model represented by the sum of exponential tails and a constant value function was employed. These simulations were validated using experimental measurements of a reference sample based on silicon dioxide on crystalline silicon (SiO2/c-Si). Additionally, a fitting process of HF-CV curves was proposed using the simple U-shape D it model. A relative error of less than 0.4% was found comparing the average values between the approximated and the experimentally extracted D it's. The constant function of the approximated D it represents an average of the experimentally extracted D it for values around the midgap energy where the recombination efficiency is highest. © Published under licence by IOP Publishing Ltd.

Instituciones: Pontificia Universidad Católica del Perú